Carry Out Macard WiFi Extender Setup with Orbi Router
May 8, 2024 / Olive Gordon

How to Carry Out Macard WiFi Extender Setup with Orbi Router?

An Orbi mesh WiFi system has its own satellites which when connected to the Orbi router, create a WiFi network throughout the home. However, there are users who still want to extend their Orbi router’s network with the help of a WiFi range extender.

If you are one among such users then read this post to know about the connection process. Here we have covered steps for how to perform Macard WiFi extender setup with Orbi router. Macard extender is taken as a reference. You can use the same steps for any other extender brand.

Macard WiFi Extender Setup with Orbi Router

If your Orbi system is not sufficient to provide you with internet access in all parts of your home, then the best solution for you is to get an Orbi add-on satellite. The satellite can be connected to themain router and placed in the area where you get no internet. But if you want to use a WiFi extender, then the steps discussed below will help you with its setup. Before you begin, we suggest you check that your Orbi firmware is up-to-date. After updating the Orbi system, follow these steps:

  • Plug in your Macard WiFi extender close to the Netgear Orbi router.
  • Let the extender boot up.
  • With the help of the Pin tool (find it in the package contents), activate the wireless extender. Simply pressing the Reset button for about 10 seconds will get this done.
  • Your extender will reboot. It will take up to 1 minute.
  • Now, you should connect your computer or phone to the extender’s network. Select its default WiFi name to connect. The default WiFi name is Wi-Fi Extender. If using a phone, turn off the mobile data.
  • Load an internet browser and enter the IP address 192.168.10.254 in the URL field.

ip interface

  • Click or tap Start Setup.
  • Choose the operation mode as WiFi extender and click Next.
  • Choose your time zone.
  • Select the network to be expanded. You should select the Orbi router’s WiFi network. You can select both 2.4 GHz and 5 GHz networks.
  • Enter the WiFi password for Orbi and click Next.
  • Your Macard extender will have the same SSID as Orbi. However, you can also change the SSID if you wish to.
  • Once you are done making all the necessary changes in the configuration, the information will display on the screen.
  • Confirm the settings and click Save & Apply.
  • Let the connection establish. Do not turn off the devices.
  • The WiFi extender will reboot once the connection is successful.

You can now move the WiFi extender to a new location where you wish to have an extended network. See to it that the extender still sits within the network range of the Orbi router. Also, avoid placing it near metallic or electronic devices.

The Closing Thoughts

This is all about how to carry out Macard WiFi extender setup with Orbi router. Your WiFi range extender is all set to cover WiFi dead spots with a seamless WiFi network.

Disclaimer: We hereby disclaim ownership of any product and any association, affiliation or representation in any form, of any brand, product or service. All the information provided here has been drafted by a team of highly qualified technical experts and regularly undergo reviews and updates.

trusted site