Netgear is a big brand that present incredible WiFi networking devices like routers, extenders, WiFi mesh systems, WiFi mesh extenders to the world. There are two series of the Netgear which are Nighthawk and Orbi. Here you will get to learn somethings about Orbi 960 series. The discussion is all about the Netgear Orbi 960 Wi-Fi 6E blinking pink light. Let’s find out its meaning, reasons, & solutions to fix it.
When the Orbi main router or one of the satellites starts flashing pink (magenta or purple), the meaning is connection issue. The satellite is not connected to the main router.
The Orbi flashes pink (magenta), it usually means or reasons are:
Pull the plug on both the modem and the Orbi. Wait like 30 seconds, plug the modem back in first, then the Orbi.
Yeah, it sounds basic, but I’ve had fiber ONTs and cable modems just stop handing out IPs until they get that power cycle.
If it goes white > blue > pink again, keep reading.
You’d be surprised. The yellow “Internet” port on the Orbi is the one that should go into your modem or ONT. If you have it plugged into one of the LAN ports, it’ll happily power up but never actually get an internet connection.
Some ISPs tie your connection to a specific MAC address. So, if you swap routers or add a new Orbi without cloning the old MAC, the modem won’t hand it an IP.
You can usually fix that by rebooting the modem, or logging into the Orbi app and enabling MAC address spoofing (clone from a working device).
If you’ve just set up the Orbi or did a firmware update, the pink light might hang if the setup didn’t finish. Try logging in at orbilogin.com and running through Orbi login page again.
If you can’t get into the web UI at all, factory reset it (paperclip in the back for ~10 seconds) and start over.
When my Orbi went pink, it turned out Spectrum’s DHCP server was just… dead. Nothing wrong with my gear. Internet came back 30 minutes later without me touching a thing.
So before you rip your mesh apart, check if your internet is actually down by plugging a laptop directly into the modem.
This wipes it completely. Back to out-of-the-box. Use this if you’re selling it, swapping ISPs, or things are just that broken.
After that, open the Orbi app or go to orbilogin.net in your browser, and set it up again like day one.
As you know the Orbi Netgear device is a mesh device which have three devices one is router and others are satellites. Here you have learned about the Netgear Orbi 960 Wi-Fi 6E blinking pink light. Hope, you know what its meaning, reasons, and solutions.
Disclaimer: We hereby disclaim ownership of any product and any association, affiliation or representation in any form, of any brand, product or service. All the information provided here has been drafted by a team of highly qualified technical experts and regularly undergo reviews and updates.